Cisco Transceiver - Wholesale price 1GE port Dual Mode EPON GPON GEPON Onu XPON huawei ftth – HDV

1. Overview
* HTR5033X is designed as HGU (Home Gateway Unit) in deferent FTTH solutions,The carrier-class FTTH application provides data service access.
* HTR5033X is based on mature and stable, cost-effective XPON technology. Itcan switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
* HTR5033X adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0 and GPON Standard of ITU-TG.984.X
2. Functional Feature
* Support EPON/GPON mode and switch mode automatically
* Support ONU auto-discovery/Link detection/remote upgrade of software
* Support RoutePPPoE/IPoE/Static IP and Bridge mode
* Support IPv4/IPv6 Dual mode
* Support Firewall function and IGMP multicast feature
* Support LAN IP and DHCP Server configuration
* Support Port Forwarding and Loop-Detect
* Support TR069 Remote Configuration and maintenance
*Specialized design for system breakdown prevention to maintain stable system
3. Hardware Specification
Technical item
Details

PON Interface

1 GPON BOB (Class B+/Class C+)
Receiving sensitivity: ≤-27dBm/≤-29dBm
Transmitting optical power:+0.5~+5dBm/+2~+7dBm
Transmission distance: 20KM
Wavelength
TX: 1310nm, RX: 1490nm
Optical Interface
SC/UPC Connector
Chip Spec
RTL9601D ,CPU 300MHz,DDR2 32MB
Flash
SPI Nor Flash 16MB
LAN Interface
1x 10/100/1000Mbps auto adaptive Ethernet interface. RJ45 connector
LED
4 LED, For Status of PWR、LOS、PON、LINK/ACT
Push-Button
2,For Function of Power on/off,Reset
Operating Condition
Temperature: 0℃~+50℃
Humidity: 10%~90%(non-condensing)
Storing Condition
Temperature: -30℃~+60℃
Humidity: 10%~90%(non-condensing)
Power Supply
DC 12V/0.5A
Power Consumption
<3W
Dimension
120mmx78mmx30mm(L×W×H)
Net Weight
0.13Kg

4. Panel lights Introduction

Pilot
Status
Description
PWR
On
The device is powered up.
Off
The device is powered down.

PON

On
The device has registered to the PON system.
Blink
The device is registering the PON system.
Off
The device registration is incorrect.
LOS
Blink
The device doses not receive optical signals.
Off
The device has received optical signal.
LINK/ACT
On
Port is connected properly (LINK).
Blink
Port is sending or/and receiving data (ACT).
Off
Port connection exception or not connected.

5. Application
* Typical Solution:FTTO(Office)、 FTTB(Building)、FTTH(Home)
* Typical Business:INTERNET、IPTV et

 

Fast 8 port ethernet switch 10 / 100 Mbps network switch Compatible cisco

2019-9 EXHIBITIONS老平台

Fast 8 port ethernet switch 10 / 100 Mbps network switch Compatible cisco


  • Cisco Transceiver - Wholesale price 1GE port Dual Mode EPON GPON GEPON Onu XPON huawei ftth – HDV Related Video:

    WhatsApp Online Chat !