Home
Products
Olt & Pon Modules
Pon Modules
Epon Olt
Epon Olt Modules
Gpon Olt Modules
Gpon Olt
XGSPON OLT
ONU
Xpon Onu
Epon Onu
Gpon Onu
Router
SFP/SFP+ Modules
10g Sfp Module
Copper Sfp Module
Sfp Module
Media Converter
Switch
Ethernet Switches
POE Switches
Reverse PoE Switch
Managed Switch
Product Video
Xpon Onu Video
Epon Onu Video
Sfp Module Video
10G Sfp Module Video
Copper Sfp Module Video
Media Converter Video
Olt Video
Ethernet Switch Video
POE Switch Video
Managed Switch Video
ONU Video
Router Video
Switches Video
OEM/ODM
360° New model
Blog
Company News
Industry News
New product release
Knowledge
Troubleshooting/solution
Support
Video Guide
Technical Support
Download DATASHEET
About Us
About Company
FAQs
Contact Us
Message Board
VR Factory
Featured
Home
News
Knowledge
The difference between SFP Modules and Media Converter
1. What are the differences between SFP Modules & Media Converter? SFP Modules are mostly used in the backbone of optical fiber network, while optical transceivers are simply devices that extend network cables.SFP Modules are accessories and are used only for optical switches and devic...
Read More
Fiber Optic transceivers usually have the following basic characteristics
1. Provides Ultra-low delay data transmission. 2. Be fully transparent about network protocols. 3. Special ASIC Chipset is used to realize data line speed forwarding. Programmable ASICS concentrate a number of functions on a chip, with simple design, high reliability, less power consumption and o...
Read More
SFP Module Related Knowledge
The SFP Module consists of optical device, functional circuit and optical interface. The optical device consists of transmitting and receiving parts. The transmitting part is: the input of a certain code rate of electrical signals, through the internal driver chip processing, driving semiconducto...
Read More
Difference between single-mode SFP module and multi-mode SFP module
An optical module consists of a photoelectronic component, a functional circuit, and an optical interface. A photoelectronic component consists of transmitting and receiving parts. To put it simply, the function of optical module is photoelectric conversion. The sending end converts electrical si...
Read More
Basic principles of WDM PON
WDM PON is a point-to-point passive optical network using wavelength division multiplexing technology. That is, in the same fiber, the number of wavelengths used in both directions is more than 3, and the use of wavelength division multiplexing technology to achieve uplink access can provide grea...
Read More
Introduction of EPON technology and test challenges faced
The EPON system consists of multiple optical network units (ONU), an optical line terminal (OLT), and one or more optical networks (see Figure 1). In the extension direction, the signal sent by the OLT is broadcast to all ONUs. 8h Modify the frame format, redefine the front part, and add the time...
Read More
<<
< Previous
17
18
19
20
21
22
23
Next >
>>
Page 20 / 47
WhatsApp Online Chat !