Best Price on 1310nm Sfp Transceiver Module - Good Price 1GE 3FE WIFI CATV PHONE Router FTTH GPON ONT ONU – HDV
Product Detail
Good Price 1GE 3FE CATV WIFI Router FTTH GPON ONT ONU
1.Overview
1G3F+WIFI+CATV+POTS series is designed as HGU(Home Gateway Unit) in deferent FTTH solutions by HDV, The carrier-class FTTH
application provides data service access.
1G3F+WIFI+CATV+POTS series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON
1G3F+WIFI+CATV+POTS series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON
and GPON when it access to the EPON OLT or GPON OLT.
1G3F+WIFI+CATV+POTS series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS)
1G3F+WIFI+CATV+POTS series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS)
guarantees to meet the technical performance of the module of China Telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X
1G3F+WIFI+CATV+POTS series is designed by Realtek chipset 9603C.
1G3F+WIFI+CATV+POTS series is designed by Realtek chipset 9603C.
2.Hardware Specification
| Technical item | Details |
| PON Interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) |
| Receiving sensitivity: ≤-27dBm | |
| Transmitting optical power: 0~+4dBm | |
| Transmission distance: 20KM | |
| Wavelength | TX: 1310nm, RX: 1490nm |
| Optical Interface | SC/APC Connector |
| POTS interface | 1 FXS, RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according to GR-909 |
| LAN Interface | 1 x 10/100/1000Mbps and 3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| CATV interface | RF, optical power : +2~-18dBm |
| Optical reflection loss: ≥45dB | |
| Optical receiving wavelength: 1550±10nm | |
| RF frequency range: 47~1000MHz, RF output impedance: 75Ω | |
| RF output level: 78dBuV | |
| AGC range: 0~-15dBm | |
| MER: ≥32dB@-15dBm | |
| Wireless | Compliant with IEEE802.11b/g/n, |
| Operating frequency: 2.400-2.4835GHz | |
| support MIMO, rate up to 300Mbps, | |
| 2T2R,2 external antenna 5dBi, | |
| Support: multiple SSID | |
| Channel: Auto | |
| Modulation type: DSSS, CCK and OFDM | |
| Encoding scheme: BPSK, QPSK, 16QAM and 64QAM | |
| LED | 14, For Status of POWER,LOS,PON,SYS,LAN1~LAN4,WIFI,WPS,Internet,FXS,Worn,Normal(CATV) |
| Push-Button | 3,For Function of Reset,WLAN,WPS |
| Operating Condition | Temperature: 0℃~+50℃ |
| Humidity: 10%~90%(non-condensing) | |
| Storing Condition | Temperature: -30℃~+60℃ |
| Humidity: 10%~90%(non-condensing) | |
| Power Supply | DC 12V/1A |
| Power Consumption | ≤6W |
| Dimension | 155mm×92mm×34mm(L×W×H) |
| Net Weight | 0.24Kg |
3.Panel lights Introduction
|
Pilot Lamp |
Status |
Description |
|
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. | |
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. | |
|
Off |
The device registration is incorrect. | |
|
LOS |
Blink |
The device doses not receive optical signals. |
|
Off |
The device has received optical signal. | |
|
SYS |
On |
The device system runs normally. |
|
Off |
The device system runs abnormally. | |
|
INTERNET |
Blink |
The device network connection is normal. |
|
Off |
The device network connection is abnormal. | |
|
WIFI |
On |
The WIFI interface is up. |
|
Blink |
The WIFI interface is sending or/and receiving data (ACT). | |
|
Off |
The WIFI interface is down. | |
|
FXS |
On |
Phone has registered to the SIP Server. |
|
Blink |
Phone has registered and data transmission (ACT). | |
|
Off |
Phone registration is incorrect. | |
|
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
|
Off |
The WIFI interface does not establish a secure connection. | |
|
LAN1~LAN4 |
On |
Port (LANx) is connected properly (LINK). |
|
Blink |
Port (LANx) is sending or/and receiving data (ACT). | |
|
Off |
Port (LANx) connection exception or not connected. | |
|
Worn (CATV) |
On |
Input optical power is higher than 3dbm or lower than -13dbm |
|
Off |
Input optical power is between -13dbm and 3dbm | |
|
Normal (CATV) |
On |
Input optical power is between -13dbm and 3dbm |
|
Off |
Input optical power is higher than 3dbm or lower than -13dbm |
4.Ordering information
|
Product Name |
Product Model |
Descriptions |
|
SFF Type XPON ONU |
1G3F+WIFI+CATV+POTS |
1×10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet , 1 SC/APC Connector, 1 FXS Connector, 2.4GHz WIFI, Plastic Casing, External power supply adapter |
5.Application
Typical Solution:FTTO(Office), FTTB(Building),FTTH(Home)
Typical Business:INTERNET,IPTV,VOD,Voip,IP Camera,CATV etc
Typical Business:INTERNET,IPTV,VOD,Voip,IP Camera,CATV etc
Figure: 1G3F+WIFI+CATV+POTS Application Diagram
Product Tags
Best Price on 1310nm Sfp Transceiver Module - Good Price 1GE 3FE WIFI CATV PHONE Router FTTH GPON ONT ONU – HDV Related Video: