1.25G Ftth Fiber 1ge Huawei GEpon Pon Onu With Router Function
Feature:
Color is optional
Router mode supports PPPoE/DHCP/ static IP
Support port-based rate limitation and bandwidth control;
In compliant with IEEE802.3ah Standard
Up to 20KM transmission Distance
Support data encryption, group broadcasting, port Vlan separation, etc.
Support Dynamic Bandwidth Allocation (DBA)
Support ONU auto-discovery/Link detection/remote upgrade of software;
Support VLAN division and user separation to avoid broadcast storm;
Support power-off alarm function ,easy for link problem detection
Support broadcasting storm resistance function
Support ACL and SNMP to configure data packet filter flexibly
Specialized design for system breakdown prevention to maintain stable system
Support software online upgrading EMS network management based on SNMP ,convenient for
maintenance
ONU Datasheet :
|
Item |
Parameter |
|
|
Interface |
PON Interface |
1 EPON optical interfaceMeet 1000BASE-PX20+ standardSymmetric1.25Gbpsupstream/downstream SC single-mode fibersplit ratio:1:64Transmission distance 20KM |
| User Ethernet Interface | 1*10/100/1000M auto-negotiation Full/half duplex modeRJ45 connector Auto MDI/MDI-X 100m distance | |
|
Power Interface |
12V DC Power supply | |
|
Performance Parameters |
PONOptical Parameter | Wavelength: Tx 1310nm, Rx1490nm Tx Optical Power: -1~4dBmRx Sensitivity: -27dBmSaturation Optical Power: -3dBm Connector Type: SCOptical Fiber: 9/125 single-mode fiber |
| Data Transmission Parameter | PON Throughput: Downstream 950Mbps; Upstream 930Mbps, 1000MbpsPacket Loss Ratio:<1*10E-12 latency: <1.5ms | |
| Gateway | Router mode supports PPPoE/DHCP/ static IP WAN support Route rand Bridge modeWAN support Internet,VoIP,IPTV,TR069LAN supports DHCP and static IP Support NAT and NAPTSupport UPnP | |