Ftth Fiber Optical Network Unit - Shenzhen Factory ONU Compatible With Huawei OLT 1GE+1FE+WIFI XPON ONU For FTTH – HDV

Product Paramenters
1. Overview
* HUR2202XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access.
* HUR2202XR is based on mature and stable, cost-effective XPON technology.
* HUR2202XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X.2. Functional Feature
* Support EPON/GPON mode and switch mode automatically
* Support Route mode for PPPoE/IPoE/Static IP and Bridge mode
* Support IPv4 and IPv6 Dual mode
* Support 4G WIFI and 2*2 MIMO
* Support LAN IP and DHCP Server configuration
* Support Port Mapping and Loop-Detect
* Support Firewall function and ACL function
* Support IGMP Snooping/Proxy multicast feature
* Support TR069 remote configuration and maintenance
* Specialized design for system breakdown prevention to maintain stable system

3.Hardware Specification

Technical item
Details

 

PON Interface

1 GPON BOB (Class B+/Class C+)
Receiving sensitivity: ≤-27dBm/≤-29dBm
Transmitting optical power: +0.5~+5dBm/+2~+7dBm
Transmission distance: 20KM
Wavelength
TX: 1310nm, RX: 1490nm
Optical Interface
SC/UPC Connector
Design Scheme
RTL9602C+RTL8192FR+Si32192 BOB(RTL8290B)
Chip Spec
CPU 625MHz,DDR2 64MB
Flash
SPI Nor Flash 16MB
LAN Interface
1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector

 

Wireless

Compliant with IEEE802.11b/g/n,
Operating frequency: 2.400-2.4835GHz
support MIMO, rate up to 300Mbps,
2T2R,2 external antenna 5dBi,
Support: Multiple SSID
Channel: Auto
Modulation type: DSSS, CCK and OFDM
Encoding scheme: BPSK, QPSK, 16QAM and 64QAM
LED
7 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2
Push-Button
2,For Function of Reset, WPS

 

Operating Condition

Temperature: 0℃~+50℃
Humidity: 10%~90%(non-condensing)

 

Storing Condition

Temperature: -30℃~+60℃
Humidity: 10%~90%(non-condensing)
Power Supply
DC 12V/1A
Power Consumption
≤6W
Dimension
180mm×107mm×28mm(L×W×H)
Net Weight
0.15Kg

4. Panel lights Introduction

Pilot Lamp
Status
Description

 

WIFI

On
The WIFI interface is up.
Blink
The WIFI interface is sending or/and receiving data (ACT).
Off
The WIFI interface is down.
WPS
Blink
The WIFI interface is securely establishing a connection.
Off
The WIFI interface does not establish a secure connection.
PWR
On
The device is powered up.
Off
The device is powered down.
LOS
Blink
The device doses not receive optical signals or with low signals.
Off
The device has received optical signal.
PON
On
The device has registered to the PON system.
Blink
The device is registering the PON system.
Off
The device registration is incorrect.

 

LAN1~LAN2

On
Port (LANx) is connected properly (LINK).
Blink
Port (LANx) is sending or/and receiving data (ACT).
Off
Port (LANx) connection exception or not connected.
5. Application
Typical Solution:FTTH(Fiber To The Home)
Typical Business:INTERNET、IPTV、WIFI etc

Fast 8 port ethernet switch 10 / 100 Mbps network switch Compatible cisco

2019-9 EXHIBITIONS老平台

Fast 8 port ethernet switch 10 / 100 Mbps network switch Compatible cisco


  • Ftth Fiber Optical Network Unit - Shenzhen Factory ONU Compatible With Huawei OLT 1GE+1FE+WIFI XPON ONU For FTTH – HDV Related Video:

    WhatsApp Online Chat !