Hot Selling for Epon Onu/Olt - FTTH Telecom Equipment 1GE+1FE+ WIFI zte Huawei GPON ONT ONU – HDV
Product Detail
1.Overview
1G1F+WIFI series is designed as HGU (Home Gateway Unit) in deferent FTTH solutions by HDV, The carrier-class FTTH application
provides data service access.
1G1F+WIFI series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON
1G1F+WIFI series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON
when it access to the EPON OLT or GPON OLT.
1G1F+WIFI series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to
1G1F+WIFI series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to
meet the technical performance of the module of China Telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X
1G1F+WIFI series is designed by Realtek chipset 9603C
1G1F+WIFI series is designed by Realtek chipset 9603C
2.Hardware Specification
| Technical item | Details |
| PON Interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) |
| Receiving sensitivity: ≤-27dBm | |
| Transmitting optical power: 0~+4dBm | |
| Transmission distance: 20KM | |
| Wavelength | Tx: 1310nm, Rx: 1490nm |
| Optical Interface | SC/UPC Connector |
| LAN Interface | 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| Wireless | Compliant with IEEE802.11b/g/n, |
| Operating frequency: 2.400-2.4835GHz | |
| support MIMO, rate up to 300Mbps, | |
| 2T2R,2 external antenna 5dBi, | |
| Support: Multiple SSID | |
| Channel: Auto | |
| Modulation type: DSSS, CCK and OFDM | |
| Encoding scheme: BPSK, QPSK, 16QAM and 64QAM | |
| LED | 11, For Status of POWER, LOS, PON, SYS, LAN1~LAN2 ,WIFI, WPS, Internet |
| Push-Button | 3,For Function of Reset, WLAN, WPS |
| Operating Condition | Temperature: 0℃~+50℃ |
| Humidity: 10%~90%(non-condensing) | |
| Storing Condition | Temperature: -30℃~+60 |
| Humidity: 10%~90%(non-condensing) | |
| Power Supply | DC 12V/1A |
| Power Consumption | ≤6W |
| Dimension | 155mm×92mm×34mm(L×W×H) |
| Net Weight | 0.24Kg |
3.Panel lights Introduction
|
Pilot Lamp |
Status |
Description |
|
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. | |
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. | |
|
Off |
The device registration is incorrect. | |
|
LOS |
Blink |
The device doses not receive optical signals. |
|
Off |
The device has received optical signal. | |
|
SYS |
On |
The device system runs normally. |
|
Off |
The device system runs abnormally. | |
|
INTERNET |
Blink |
The device network connection is normal. |
|
Off |
The device network connection is abnormal. | |
|
WIFI |
On |
The WIFI interface is up. |
|
Blink |
The WIFI interface is sending or/and receiving data (ACT). | |
|
Off |
The WIFI interface is down. | |
|
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
|
Off |
The WIFI interface does not establish a secure connection. | |
|
LAN1~LAN2 |
On |
Port (LANx) is connected properly (LINK). |
|
Blink |
Port (LANx) is sending or/and receiving data (ACT). | |
|
Off |
Port (LANx) connection exception or not connected. |
4.Ordering information
|
Product Name |
Product Model |
Descriptions |
|
SFF Type XPON ONU |
1G1F+WIFI+CATV+POTS |
1×10/100/1000Mbps Ethernet, 1 x 10/100Mbps Ethernet , 1 SC/APC Connector, 1 FXS Connector, 2.4GHz WIFI, 1FXS FJ11 Connector, Plastic Casing, External power supply adapter |
4.Application
Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
Typical Business：INTERNET、IPTV、VOD、IP Camera etc
Typical Business：INTERNET、IPTV、VOD、IP Camera etc
Product Tags
Hot Selling for Epon Onu/Olt - FTTH Telecom Equipment 1GE+1FE+ WIFI zte Huawei GPON ONT ONU – HDV Related Video: