Renewable Design for Lc Fiber Module - New Customized Fiber Optical 4GE+4WIFI GPON Dual Band ONU Wifi EPON XPON AC ONT – HDV

New Customized Fiber Optical 4GE+4WIFI GPON Dual Band ONU Wifi EPON XPON AC ONT

Products Description

1. Overview

* HUR4002XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access.
*HUR4002XR is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT.
*HUR4002XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X

2. Functional Feature

*Support EPON/GPON mode and switch mode automatically

*Support Route mode for PPPoE/DHCP/Static IP and Bridge mode
*Support IPv4 and IPv6 Dual mode
*Support 2.4G&5.8G WIFI and Multiple SSID
*Support SIP Proctol for Voip Service
*Support LAN IP and DHCP Server configuration
*Support Port Mapping and Loop-Detect
*Support Firewall function and ACL function
*Support IGMP Snooping/Proxy multicast feature
*Support TR069 remote configuration and maintenance
*Specialized design for system breakdown prevention to maintain stable system

3. Hardware Specification

Technical item
Details
PON Interface
1 GPON BoB(Bosa on Board)
Receiving sensitivity: ≤-27dBm
Transmitting optical power: +1~+4dBm
Transmission distance: 20KM
Wavelength
TX: 1310nm, RX: 1490nm
Optical Interface
SC/APC Connector
Design Scheme
RTL9607C+RTL8192FR(2.4G)+RTL8812FR(5G)+Si32192 BOB(RTL8290B)
RAM
2Gbit DDR3
Flash
1Gbit SPI NAND Flash
LAN Interface
4 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
Wireless
Compliant with IEEE802.11b/g/n,ac
2.4G Operating frequency:2.400-2.4835GHz
5.8G Operating frequency:5.150-5.825GHz
2.4G 2*2 MIMO, rate up to 300Mbps
5.8G 2*2 MIMO ,rate up to 867Mbps
4 external antennas 5dBi
Support Multiple SSID
LED
11 LED, For Status of PWR、LOS、PON、LAN1~LAN4、2.4G、5.8G
Worn、 Normal(CATV)
Push-Button
2 ,For Function of Reset and WPS
Operating Condition
Temperature: 0℃~+50℃
Humidity: 10%~90%(non-condensing)
Storing Condition
Temperature: -30℃~+60℃
Humidity: 10%~90%(non-condensing)
Power Supply
DC 12V/1A
Power Consumption
≤6W
Dimension
260mm×158mm×192mm(L×W×H)
Net Weight
0.35Kg
Storing Condition
Temperature: -30℃~+60℃

4. Panel lights Introduction

Pilot Lamp
Status
Description
PWR
On
The device is powered up.
Off
The device is powered down.
LOS
Blink
The device doses not receive optical signals or with low signals.
Off
The device has received optical signal.
PON
On
The device has registered to the PON system.
Blink
The device is registering the PON system.
Off
The device registration is incorrect.
LAN1~LAN4
On
Port (LANx) is connected properly (LINK).
Blink
Port (LANx) is sending or/and receiving data (ACT).
Off
Port (LANx) connection exception or not connected.
2.4G
On
2.4G WIFI interface up
Blink
2.4G WIFI is sending or/and receiving data (ACT).
Off
2.4G WIFI interface down
5.8G
On
5G WIFI interface up
Blink
5G WIFI is sending or/and receiving data (ACT).
Off
5G WIFI interface down

5.Application

Typical Solution:FTTH(Fiber To The Home)
Typical Business:INTERNET、IPTV、WIFI etc
11_看图王 12_看图王 13_看图王

 

 


  • Renewable Design for Lc Fiber Module - New Customized Fiber Optical 4GE+4WIFI GPON Dual Band ONU Wifi EPON XPON AC ONT – HDV Related Video:

    WhatsApp Online Chat !